 |
The Filter Breeze Difference10 reasons for using
|
Scented Pads / Substrates |
Filter Breeze Spray |
| Pads must be used to deliver fragrance. |
No pads necessary! |
| Punching holes in filter is sometimes required. |
No holes in filter! |
| Must handle scented pad when attaching. |
Simply spray on filter. Quick, clean and easy! |
| To control fragrance level requires using 2 pads at one time (stronger scent) or tearing one in half (milder scent). Fragrance can be
very strong at first and can diminish quickly. |
Fragrance level can be easily controlled by the number of sprays on the filter. More sprays = stronger fragrance. Less Sprays =
milder fragrance. You control the fragrance level! |
| Recommended that pad be attached to front side of filter to prevent pad from potentially damaging system by blowing off backside into system. |
Fragrance can be applied to front or backside of filter. |
| Dust can collect on fragrance material on front side of filter prior to dust particles being filtered. |
By allowing the fragrance to be applied to the backside of the filter, dust particles can be filtered out prior to air flowing over
fragrance material. This should allow less dust to accumulate on the poly spray fragrance for maximum results! |
| As scent diminishes, old pad must be removed (requires handling again), disposed of and replaced with a new scented pad or pads. |
Simply open filter and apply more fragrance and enjoy. Less time and effort! |
| Pads can be difficult to use in the new “slide in” AC units. |
Spray allows the filter to slide in normally – nothing protruding from the filter itself! |
| One whole scented pad treats 1 filter |
1 bottle treats up to 6 – 8 filters! |
| Retail cost for one pad runs approximately $1.88 to $2.99 per use. |
Retail cost for 1 bottle runs approximately $3.59 to $4.99 or approximately .50 to .60 cents per use. |
